Aluminum Foil Butyl tape Top Self Adhesive Flashing Tape for roof window repair outdoor
|
Butyl tape is a kind of self-adhesive waterproof sealing tape which is made by advanced technology with butyl rubber as the raw material . It has strong adhesion to all kinds of material surface , at the same time it has excellent weather resistance ,aging resistance and waterproof , to the surface of the adhesive sealing ,shock absorption , protection and other function.
1. Excellent mechanical properties: high adhesive strength and
tensile strength; good elasticity and elongation.
1.waterproofing work of the roofing ,underground and structural construction joint of new projects,as well as the lap joint and sealing of high polymer waterproof roll 2.sealing and waterproofing work of the structural construction joint of subway tunnels 3.gas tightness ,water tightness and shock absorption of the joint of colorful contour plate,as well as the gas tightness,water tightness and shock absorption of the joint of the polycarbonate sheet engineering 4.bonding and sealing work for the assembly and installation of vehicles 5. waterproof and sealing work for the joint of the steel structure construction. 1. Substrates Fuhua Butyl Waterproofing Tape will adhere to most building surfaces, including: 1) Primed or dense concrete. 2) Timber. 3) Structural sheeting. 4) Glazed surfaces. 5) Gypsum boards and brickwork. 6) Marble, granite and ceramics. 7) Plastics and polycarbonate. 8) Galvanised iron, zincalume, copper, aluminium, colorbond and most metals 2. Surface Preparation 1) Surfaces must be clean, smooth and dust free. 2) Surfaces must be dry and free of any residual moisture. 3) For any porous surface that contains surface dust or residue, prime or seal the substrate first. 4) Rough surfaces must be levelled or smoothed. 5) All metals must be free of oils, grease and wax residues. 3. Installation 1) Unroll the Fuhua Butyl Waterproofing Tape and measure the required length. Cut the tape using scissors or a sharp cutter knife. 2) Remove release paper from the butyl rubber side and position the tape in place, ensuring the fabric face is exposed upwards. 3) Press into place with a spatula, roller, sponge or cloth, ensuring air pockets and creases are pushed out. 4) For large runs over joint areas, consider removal of release paper as the tape is being unrolled and adhere into position. 5) Finishes can be applied immediately after the tape is in place. |
Strong Single-Adhesive Ability Aluminum Foil Roof Sealing Waterproof butyl rubber tape for Roof Repair |
Aluminum Foil Butyl Rubber Aluminum Foil 1.5mm Self-Adhesive Butyl Rubber Waterproof Sealing Tape |
Aluminum Foil Butyl Rubber Waterproof Roof Tape Sealing Repair Roof Waterproof Butyl rubber Tape |
Aluminum Foil Butyl tape Top Self Adhesive Flashing Tape for roof window repair outdoor |
Aluminum Foil Butyl Powerful Waterproof Tape High Viscosity Mending Waterproof Membrane |
Aluminum Foil Butyl Powerful self adhesive butyl rubber tape super sticky aluminum foil butyl tape |