| Dimensions with packaging (H x W x D) [mm (in.)] | 175 mm x 650 mm x 550 mm (6.9 in. x 25.6 in. x 21.7 in.) |
| Dimensions without packaging (H x W x D) [mm (in.)] | - Basic dimensions (excluding the parts protruding from the body):
43.6 mm x 442.0 mm x 420.0 mm (1.72 in. x 17.40 in. x 16.54 in.)
- Maximum dimensions (the depth is the distance from ports on the
front panel to the parts protruding from the rear panel): 43.6 mm x
442.0 mm x 446.1 mm (1.72 in. x 17.40 in. x 17.56 in.)
|
| Weight without packaging (base configuration) [kg (lb)] | 5.7 kg (excluding optical modules, power modules, and fan modules) |
| Weight without packaging (full configuration) [kg (lb)] | 7.8 kg (17.2 lb) (including AC power modules and fan modules,
excluding optical modules, calculated based on the heaviest model
if multiple models are supported) |
| Weight with packaging (base configuration) [kg (lb)] | 8.95 kg |
| Weight with packaging (full configuration) [kg (lb)] | 11.05kg |
| Installation Type | Cabinet Installation |
| CPU | 4-core, 1.4GHZ |
| Memory | DRAM: 4 GB |
| NOR Flash | 64 MB |
| NAND Flash | 4 GB |
| USB | Supported |
| Power supply mode | |
| Console port | RJ45 |
| Downlink Service interface | 48*25GE SFP28 (Note: 1. 25GE ports can be configured to work at 10
Gbit/s or 1 Gbit/s. Every four downlink 25GE ports form a group,
and can be configured to work at 10 Gbit/s or 1 Gbit/s through the
command; 2. 10GE LRM/80KM linear optical modules are not supported;
3. 1 m 25GE copper cables and 1 m/3 m/5 m 10GE copper cables are
supported, and auto-negotiation of copper cables is not supported;
4. 25GE copper cables can only be used on stack ports and M-LAG
peer-link ports.) |
| Uplink Service interface | 6*100GE QSFP28 (Note: 1. Each 100G QSFP28 port can be configured to
work at 40 Gbit/s. 2. A 100G QSFP28 port cannot be split into four
25GE or 10GE ports. 3. 100GE and 40GE 1/3/5 m copper cables are
supported, but auto-negotiation of copper cables is not supported.
100GE and 40GE copper cables can only be used on stack interfaces
and M-LAG peer-link interfaces. 100G 3/5 m copper cables support
only RS FEC. After the non-RS FEC mode is configured, the port
enters the error-down state.) |
| Service port supporting the stack function | 25GE optical ports, and 100GE optical ports |
| RTC | Supported |
| Typical power consumption [W] | 226 W (100% throughput, SFP28 high-speed cables on 48 ports and
QSFP28 high-speed cables on 6 ports, dual power modules) 261 W (100% throughput, short-distance optical modules on all
ports, dual power modules) |
| Typical heat dissipation [BTU/hour] | 771 BTU/hr (100% throughput, SFP28 high-speed cables on 48 ports
and QSFP28 high-speed cables on 6 ports, dual power modules) 891 BTU/hr (100% throughput, short-distance optical modules on all
ports, dual power modules) |
| Static power consumption [W] | 167 W |
| Static heat dissipation [BTU/hour] | 570 BTU/hour |
| Maximum power consumption [W] | 384 W |
| Maximum heat dissipation | 1310 BTU/hour |
| Number of power modules | 2 |
| Redundant power supply | 1+1 backup |
| Rated input voltage [V] | Rated AC input voltage range: 100 V AC to 240 V AC; 50/60 Hz Rated –48 V DC input voltage range: –48 V DC to –60 V DC Rated input voltage range for 600 W AC & 240 V DC: 240 V DC Rated input voltage range for 1200 W HVDC: 240 V DC to 380 V DC |
| Input voltage range [V] | Maximum AC input voltage range: 90 V AC to 290 V AC; 45 Hz to 65 Hz Maximum –48 V DC input voltage range: –38.4 V DC to –72 V DC Maximum input voltage range for 600 W AC & 240 V DC: 190 V DC
to 290 V DC Maximum input voltage range for 1200 W HVDC: 190 V DC to 400 V DC |
| Maximum input current [A] | 600 W AC&240 V DC power module (PAC600S12 series): · 8 A (100 V AC to 240 V DC) · 4 A (240 V DC) 1000 W DC power module (PDC1000S12 series): 30 A (–48 V DC to –60 V
DC) 1200 W high-voltage DC power module (PHD1K2S12 series): 8 A |
| Rated output power [W] | 600 W (AC&240 V HVDC) 1000 W (–48 V DC) 1200 W (380 V HVDC) |
| Certification | · Complies with safety standards. · Complies with EMC standards. · Complies with environmental protection standards. |
| Power supply surge protection [kV] | AC: 6 kV in common mode and 6 kV in differential mode DC: 4 kV in common mode and 2 kV in differential mode HVDC: 4 kV in common mode and 2 kV in differential mode |
| Types of fans | Pluggable |
| Number of fans | 4 |
| Redundant fans | The device supports 3+1 backup of fan modules that work in hot
standby mode. The system can operate properly for a short time
after a single fan module fails. You are advised to replace the
faulty fan module immediately. |
| Heat dissipation mode | Air cooling |
| Airflow direction | Front-to-back or back-to-front, depending on the fan modules and
power modules. |
| Availability | 0.9999962836 |
| MTBF [year] | 47.81 years |
| MTTR [hour] | 1.95 hours |
| Noise at normal temperature (27°C, sound pressure) [dB(A)] | - Front-to-back airflow: < 58 dB(A)
- Back-to-front airflow: < 57 dB(A)
|
| Noise at high temperature (40°C, sound pressure) [dB(A)] | - Front-to-back airflow: < 75 dB(A)
- Back-to-front airflow: < 74 dB(A)
|
| Long-term operating altitude [m (ft.)] | ≤ 5000 m (16404 ft.) |
| Long-term operating relative humidity [RH] | 5% RH to 95% RH, noncondensing |
| Long-term operating temperature [°C (°F)] | 0°C to 40°C (32°F to 104°F) at an altitude of 0–1800 m (0–5906 ft.) NOTE:When the altitude is 1800–5000 m (5096–16404 ft.), the highest
operating temperature reduces by 1°C (1.8°F) every time the
altitude increases by 220 m (722 ft.). |
| Storage altitude [m (ft.)] | ≤ 5000 m (16404 ft.) |
| Storage relative humidity [RH] | 5% RH to 95% RH, noncondensing |
| Storage temperature [°C (°F)] | –40°C to +70°C (–40°F to +158°F) |
