Saturated Steam AAC Chemical Autoclave / AAC Block Machine , High Temperature and High pressure
|
|
Saturated Steam AAC Chemical Autoclave / AAC Block Machine , High Temperature and high pressure
Quick Details:
Heating medium: saturated steam Rail distance & height: 800×250(General) (can be design according to buyer) Light rail: 24kg/m (China-standard) Admission direction: both middle-sides inlet Door opening form: double upside opening Inlet pipe diameter:DN100 Plate thickness:16mm End thickness:26mm Designed temperature: 204 Celsius degree Designed pressure: 1.6 Mpa Working temperature: 201 Celsius degree Working pressure: 1.5 Mpa Hydraulic test: 2.1 Mpa Safety valve working pressure: 1.58Mpa Working medium: saturated steam Heating method: High temperature steam Main pressure parts: Q345R(GB713), 16MnⅡ (NB/T47008) Designed service life: 20 Years Weight: 71Tons The enclosure dimensions are 33m×3.5m×3.5m . (nude package) Raw Material: sand lime brick, cement, flyash brick, slag brick, aerated concrete block, etc.
After-sales service
1. Freely direct position, installation, debugging, and on-site
training to use normally, and direct users to use autoclave safely,
high efficiently, and conveniently. 2. Provide reasonable suggestions for production line of autoclave
of users to yield the gratest efficiency of equipments. 3. Provide quick-wear parts and spare parts . 4. Review clients for usage of autoclave.
What is AAC ?
1. Areated concrete common conception.Common concrete density is usually 1600-2400kg/m3,but areated concrete are 500kg/m3,600kg/m3,700kg/m3.It has not the big grain,main use silicon material (for example:flyash,sand,stone dust and others ),through making the material small for example sand,they can be used directly if has enough degree of small (for example fly ash.Mixing calcium material lime, cement water to a special slop,then add the aluminum dust and the additive.Make the aluminum dust and the special slop have a Chemical reflect.then produce Hydrogen to make the concrete slop to expanding or swell,foam.Next,put them into the curing room to concreting cutting steaming curing,last,there will bacome the light brick,the porous rate is 70-80%. 2. Aerated Autoclaved concrete block (light block ) is the light and porous building material. It has light ,keeping temperature , Environmental protection,can't burn and other advantages.it has a wide prospect of market.it is the main building material in the future. it can be made into many kinds of bricks(for example:600×200×100,80×80×180,240×115×53,600×200×125),they could be used industry building and common building.they are more and more popular in the world.in the future,they will replace the Clay brick completely.
Feature of AAC:
1. Sound proof AAC wall has an excellent sound Transmission class (STC) ,rating of
44. Result: Virtually Soundproof Interiors! 2. Thermal Insulation It has highest thermal rating in the industry….R30! Thus provides
well insulated interiors, keeping out warm air in summer and cold
air in winters.AAC reduces Air conditioning cost by 30%. 3. Earthquake Resistant Earthquake forces on structure are proportional to the weight of
the building, hence AAC shows excellent resistant to earthquake
forces. Regions of high seismic activity like Japan exclusively use
AAC. It has been proven to withstand wind loads of category 5
tropical storms. 4. Floor Space Area Use of thinner blocks (6" instead of 9" exterior walls) because of
its excellent water barrier & insulation properties leads to an
increase in floor space area between 3-5%. 5. Fire Resistant Best in class fire rating of 4 hours. The melting point of AAC is
over 1600 ºc, more than twice the typical temperature in a building
fire of 650 ºc. 6. Cost saving Being lightweight AAC drastically reduces the dead weight of
building, resulting into reduction in steel (up to 27%) and cement
(up to 20%) structural cost saving.Being 8 times the size of a clay
brick, AAC wall construction involves 1/3 the joints, thus an
overall mortar saving up to 66%. Its automatic manufacturing process gives AAC an exceptional
dimensional accuracy & smooth surfaces, eliminating need of
three-coat plaster walls and allows for a final 6 mm skim coat
(putty/POP).
AAC land and workshop require:
50000m3 to100000m3,workshop is 2000m2,the land is 8000m2. 150000m3,workshop is 2500m2,the land is 10000m2. 200000-300000 m3,workshop is 3000m2,the land is 15000m2. Above please refer to ,the bigger the better.
Product Description:
Autoclave is key equipment which has a widely application in building material factory to autoclaved cure different kinds of building materials. It is also used in areas of chemical, textile, wood, Glass, Brick, metallurgy, Rubber, military industry. Convenient operation, security and reliable are its advantages. Autoclave belongs to pressure vessel which has explosion risk. According to the supervision regulation on safety technology for pressure vessel on divide standard of pressure vessel, the product is part of first and second class pressure vessel. Before putting into operation, the end-user must register in the local boiler and pressure vessel safety supervision organization and acquire the operation permit, at the same time it must accept supervision and inspection.
Advantages of Autoclave of Olymspan
1. Patents we possess at present: a) Autoclave of hydraulic automatic opening-door device (ZL 2011 2
0025592.4) b) Electrical safety interlock device of autoclave (ZL 2011 2
0026871.2) c) The pressure drainage device of autoclave (ZL 2011 2 0025595.8) d) Posses autoclave of automatic door operator (ZL 2011 2
0025674.9) e) Worktable of cutting kettle tooth (ZL 2011 2 0025738.5) 2. Material: a) φ133×25 tube to make DN100 and the material is 20-GB9948. b) 16MnIIlevel of making flange forging c) Q345R-GB713 of Hanggang in Hebei. 3. Process: a) After welding kettle door, it must proceed annealing heat
treatment. b) Polish toothed cutter of flange of autoclave body, and carry out
magnetic particle testing. c) Use double scale container board, and ensure the longitudinal
joint of each section. d) Carry out the physical and chemical test (stretch, impact),
ensure its strength. e) Welds are 100% X-ray detection, then carry out hydraulic test of
2.1MPa after passing. The whole process is complete inspected by
CSEI factory inspection, and leave factory after stamp and
signature . 4. Security Measures:(Triple Security) a).Hand speed reducer installs mechanical interlocking, and we
don't move when there's pressure in kettle. b).Equip with electric limited safety interlocking device,use
cooperatively with manual limit, and connect with electric cabinet,
rotating electrical ark with pressure and sound-light alarm. c).Equip with manual limited safety interlocking device, stuck
kettle manually, and when it opens , then we can open the door. Specifications:
5. Our factory 5. Our Team: |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Product Tags: high pressure autoclaves aac block plant Saturated Steam AAC Chemical Autoclave | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
AAC autoclave for steam-cured building materials with fully condensation and drainage system |
|
Steam Curing 2*31M Or Customized Sand High Pressure Autoclaves For Hollow Block Brick |
|
Olymspan semi or full automatic aac autoclave fly ash block brick cutting and making machine |
|
Customized Sand fully automatic autoclave Building Materials Production Line for wood |
|
AAC Autoclave Autoclaved Aerated Concrete Autoclaved Concrete Autoclave Block Brick Building Materials |
|
AAC Autoclave With ASME Certificate And Mechanical Safety Interlock |