MPC8272ZQMIBA - Motorola, Inc - MPC8272 PowerQUICC II Family Hardware Specifications

Quick Detail:

 MPC8272 PowerQUICC II Family Hardware Specifications

Description:

This hardware specification contains detailed information on power considerations, DC/AC electrical characteristics, and AC timing specifications for the MPC8272 family of devices—the MPC8272, the MPC8248, the MPC8271, and the MPC8247. These devices are .13µm (HiP7) members of the PowerQUICC II™ family of integrated communications processors. They include on a single chip a 32-bit PowerPC™core that incorporates memory management units (MMUs) and instruction and data caches and that implements the PowerPC instruction set; a modified communications processor module (CPM); and an integrated security engine (SEC) for encryption (the MPC8272 and the MPC8248 only).

Applications:

• Dual-issue integer (G2_LE) core

— A core version of the MPC603e microprocessor

— System core microprocessor supporting frequencies of 266-400 MHz

— Separate 16-Kbyte data and instruction caches:

– Four-way set associative

– Physically addressed

– LRU replacement algorithm

— PowerPC architecture-compliant memory management unit (MMU)

— Common on-chip processor (COP) test interface

— Supports bus snooping for cache coherency

— Floating-point unit (FPU) supports floating-point arithmetic

— Support for cache locking

• Low-power consumption

• Separate power supply for internal logic (1.5 V) and for I/O (3.3 V)

• Separate PLLs for G2_LE core and for the communications processor module (CPM)

— G2_LE core and CPM can run at different frequencies for power/performance optimization

— Internal core/bus clock multiplier that provides 2:1, 2.5:1, 3:1, 3.5:1, 4:1, 4.5:1, 5:1, 5.5:1, 6:1,

7:1, and 8:1 ratios

— Internal CPM/bus clock multiplier that provides 2:1, 2.5:1, 3:1, 3.5:1, 4:1, 5:1, and 6:1 ratios

• 64-bit data and 32-bit address 60x bus

— Bus supports multiple master designs—up to two external masters

— Supports single transfers and burst transfers

— 64-, 32-, 16-, and 8-bit port sizes controlled by on-chip memory controller

• 60x-to-PCI bridge

— Programmable host bridge and agent

— 32-bit data bus, 66 MHz, 3.3 V

— Synchronous and asynchronous 60x and PCI clock modes

— All internal address space available to external PCI host

— DMA for memory block transfers

— PCI-to-60x address remapping

• System interface unit (SIU)

— Clock synthesizer

— Reset controller

— Real-time clock (RTC) register

— Periodic interrupt timer

— Hardware bus monitor and software watchdog timer

— IEEE 1149.1 JTAG test access port

• Eight bank memory controller

— Glueless interface to SRAM, page mode SDRAM, DRAM, EPROM, Flash, and other user-definable peripherals

— Byte write enables

— 32-bit address decodes with programmable bank size

— Three user programmable machines, general-purpose chip-select machine, and page mode pipeline SDRAM machine

— Byte selects for 64-bit bus width (60x)

— Dedicated interface logic for SDRAM

• Disable CPU mode

• Integrated security engine (SEC) (MPC8272 and MPC8248 only)

— Supports DES, 3DES, MD-5, SHA-1, AES, PKEU, RNG and RC-4 encryption algorithms in hardware

• Communications processor module (CPM)

— Embedded 32-bit communications processor (CP) uses a RISC architecture for flexible support for communications peripherals

— Interfaces to G2_LE core through on-chip dual-port RAM and DMA controller. (Dual-port

RAM size is 16 Kbyte plus 4Kbyte dedicated instruction RAM.)

• Universal serial bus (USB) controller

— Supports USB 2.0 full/low rate compatible

— USB host mode

– Supports control, bulk, interrupt, and isochronous data transfers

– CRC16 generation and checking

– NRZI encoding/decoding with bit stuffing

– Supports both 12- and 1.5-Mbps data rates (automatic generation of preamble token and

data rate configuration). Note that low-speed operation requires an external hub.

– Flexible data buffers with multiple buffers per frame

– Supports local loopback mode for diagnostics (12 Mbps only)

— Supports USB slave mode

– Four independent endpoints support control, bulk, interrupt, and isochronous data transfers

– CRC16 generation and checking

– CRC5 checking

– NRZI encoding/decoding with bit stuffing

– 12- or 1.5-Mbps data rate

– Flexible data buffers with multiple buffers per frame

– Automatic retransmission upon transmit error

— Serial DMA channels for receive and transmit on all serial channels

— Parallel I/O registers with open-drain and interrupt capability

— Virtual DMA functionality executing memory-to-memory and memory-to-I/O transfers

— Two fast communication controllers (FCCs) supporting the following protocols:

– 10-/100-Mbit Ethernet/IEEE 802.3 CDMA/CS interface through media independent interface (MII)

– Transparent

– HDLC—up to T3 rates (clear channel)

– One of the FCCs supports ATM (MPC8272 and MPC8271 only)—full-duplex SAR at 155

Mbps, 8-bit UTOPIA interface 31 Mphys, AAL5, AAL1, AAL2, AAL0 protocols, TM 4.0

CBR, VBR, UBR, ABR traffic types, up to 64-K external connections

— Three serial communications controllers (SCCs) identical to those on the MPC860 supporting  the digital portions of the following protocols:

– Ethernet/IEEE 802.3 CDMA/CS

– HDLC/SDLC and HDLC bus

– Universal asynchronous receiver transmitter (UART)

– Synchronous UART

– Binary synchronous (BiSync) communications

– Transparent

– QUICC multichannel controller (QMC) up to 64 channels

• Independent transmit and receive routing, frame synchronization.

• Serial-multiplexed (full-duplex) input/output 2048-, 1544-, and 1536-Kbps PCM highways

• Compatible with T1/DS1 24-channel and CEPT E1 32-channel PCM highway, ISDN

basic rate, ISDN primary rate, and user defined.

• Subchanneling on each time slot.

• Independent transmit and receive routing, frame synchronization and clocking

• Concatenation of any not necessarily consecutive time slots to channels independently

for Rx/Tx

• Supports H1,H11, and H12 channels

• Allows dynamic allocation of channels

– SCC3 in NMSI mode is not usable when USB is enabled.

— Two serial management controllers (SMCs), identical to those of the MPC860

– Provides management for BRI devices as general-circuit interface (GCI) controllers in

time-division-multiplexed (TDM) channels

– Transparent

– UART (low-speed operation)

— One serial peripheral interface identical to the MPC860 SPI

— One I2

C controller (identical to the MPC860 I2

C controller)

– Microwire compatible

– Multiple-master, single-master, and slave modes

— Up to two TDM interfaces

– Supports one group of two TDM channels

– 1024 bytes of SI RAM

— Eight independent baud rate generators and 14 input clock pins for supplying clocks to FCC,

SCC, SMC, and USB serial channels

— Four independent 16-bit timers that can be interconnected as two 32-bit timers

• PCI bridge

— PCI Specification revision 2.2-compliant and supports frequencies up to 66 MHz

— On-chip arbitration

— Support for PCI to 60x memory and 60x memory to PCI streaming

— PCI host bridge or peripheral capabilities

— Includes four DMA channels for the following transfers:

– PCI-to-60x to 60x-to-PCI

– 60x-to-PCI to PCI-to-60x

– PCI-to-60x to PCI-to-60x

– 60x-to-PCI to 60x-to-PCI

— Includes the configuration registers required by the PCI standard (which are automatically loaded from the EPROM to configure the MPC8272) and message and doorbell registers

— Supports the I2O standard

— Hot-Swap friendly (supports the Hot Swap Specification as defined by PICMG 2.1 R1.0 August 3, 1998)

— Support for 66-MHz, 3.3-V specification

— 60x-PCI bus core logic, which uses a buffer pool to allocate buffers for each port.

Specifications:

Competitive Advantage:

Warranty :180 days !
Free shipping: Order over $1000 win a free shipment fee
(goods weight below 3Kg) ,during 20130901-20130930 .

Why buy from us >>> Fast / Safely / Conveniently

•    Mega Source is a Stock keeper and trade company of Electronic components .Our branches office include China, Hong Kong, Sigapore , Canada . Offer business, service, resourcing and information for our global member.
•    Goods are ensured the highest quality possible and are delivered to our customers all over the world with speed and precision.
 

How to buy >>>

•    Contact us by email & sent your inquire with your Transport destination .
•    Online chat, the commissioner would be responded ASAP.
 

Service >>>

•    Forwarder Shipment to world-wide, DHL ,TNT ,UPS,FEDEX etc.  buyer don`t need to worry about shipping problem
•    We will try to respond as quickly as possible. But due to time zone difference, please allow up to 24 hours to get your mail replied. The products were tested by some devices or software, we ensure that there is no quality problems.
•    We are committed to providing fast, convenient and safe transportation service to global buyer.