China Tensile Testing Machines manufacturer
Dongguan Haida Equipment Co.,LTD
Dongguan Haida Equipment Co.,LTD
12
Home > Products > Aging Test Chamber >

Automatic Steel UV Aging Test Chamber , Standard UVA Accelerated Weathering Tester

Automatic Steel UV Aging Test Chamber , Standard UVA Accelerated Weathering Tester

Place of Origin Guangdong, China (Mainland)
Brand Name HAIDA
Certification ISO 9001:2000; ISO 9001:2008; QS-9000; ISO 14001:2004; CE, , SMC, CMC, CPA, CE,CMA,IMC
Model Number HD-E802-2
Minimum Order Quantity 1 Set
Price Negotiable
Packaging Details ach set protected with resin fiber and PP film, then put into Strong wooden case with operation man
Delivery Time 20 days after order confirmed
Payment Terms L/C,D/A,D/P,T/T,Western Union,MoneyGram,In cash, escrow
Supply Ability 300 Sets per Month Haida
Humidity range ≥95%R.H
Material SUS 304 steel
use 304 Steel UV Aging Test Chamber
product name uv test chamber
Temperature control PID self-tuning temperature control mode
Temperature Resolution 0.1 ℃
Voltage 220V ± 5%;single-phase three-wire;50Hz;10A;15A GFCI requirements
Wavelength range UV-A wavelength range of 315 ~ 400nm
Detailed Product Description

 

         Automatic Steel UV Aging Test Chamber , Standard UVA Accelerated Weathering Tester

 

 

Product description:

 

UV Aging Test Chamber  Optimal fluorescent UV lamps using analog section sunlight UV spectrum, combined with temperature control, and other apparatus for the wet material to cause discoloration analogy, brightness, strength decreases, cracking, flaking, dusting, oxidation and other damage sunlight (UV) , At the same time through the synergies between ultraviolet light and moisture makes the material a single light resistance or a single ability to weaken or failure, which is widely used to evaluate the weather resistance of materials

 


Application industry (not limited to the following):
1. Paint ink paint, resin, plastic
2. Printing and packaging, aluminum, adhesives
3. Motorcycle industry, cosmetics,
4. Metal, electronics, electroplating, medicine

5. Textile,fabric,rubber,and so on.

 

 

Applications function:
1.Simulate the sun, rain spray and condensation resulting damage to test the materials by exposure to sunlight with moisture and temperature.
2.To get the results of damage after several days or weeks which is equal to expose to outside for a few months. The damages include fading, discoloration, brightness down, powder, crack, blur, brittle, strength decreases and oxidation.
3.Provide reference with testing data for improvement of existing materials, or to assess the impact of changes in product durability and other aspects.

 

Test standard(inculding but not limited to... ):
Compliance with ASTM G154, GB/T5170.9 standards,etc.

 

The main technical parameters:

 

ItemSpecification
Inside dimension650 mm×1140 mm×500mm(D×W×H)
Outside dimension700 mm×1340 mm×1800mm(D×W×H)
Chamber materialSUS#304 stainless steel
Temperature rangeRT~70℃
Temperature fluctuation±2℃
Temperature controlPID SSR control
Humidity range:≥95%RH
ControllerProgrammable controller, LCD touch screen
Control modeBalance temperature humidity control (BTHC)
Test cycle settingUV exposure, condensation and water spray test cycle is programmable
Lamp power40W/Piece
Distance from sample to lamp50±2mm
Centre distance between the lamp70mm
Irradiance0.45~0.85W/m2 (optional)
UV lampsImported Atlas UV-A: 315-400nm 
Testing time1~999s, m, h adjustable
Protection system

Overload short circuit protection

Over temperature protection

Water lacking protection

Earth leakage protection

Auto shut off protection

 

Chamber Structure


The inner bladder of the chamber is made of imported high-class stainless steel plate while the outer bladder is made of SUS 304 steel plate.

The heating mode adopts inner bladder trough type heating with its rapid temperature rise and even temperature distribution.

 

Control System:

 

Adopts black aluminum plate to connect temperature sensor and adopts black board temperature meter to control heating so as to ensure more stable temperature.
The radiometer probe is fixed so as to avoid the frequent installation and disassembly.
The radiation quantity adopts the special UV irradiatometer with high-precision display and measurement.
The radiation intensity is not more than 50W/m2.
The illumination and condensation can be controlled independently or alternating and circularly.

 

Test Specimen Mounting:

 

The standard test specimen holder accommodates 2 panels 75×150mm. The test panels are actual the side wall of the chamber. To properly seal the chamber, it is important to have every panel holder filled with specimens or blank panels and to have panel holders in place.

 

UV Accelerated Weathering Tester_pdf.pdf

 

Product Tags: uv aging test chamber   aging test machine  
Related Products
Email to this supplier
 
From:
Enter your Email please.
To: Dongguan Haida Equipment Co.,LTD
Subject:
Message:
Characters Remaining: (80/3000)