220V Constant Temperature And Humidity Chambers,PCL Control
Environment Chamber Product Features
1. Freezer imported by the French original armored warrior
compressor and use environmental-friendly refrigerant (R134a,
R404a, R23).
9. Frozen system uses units or low-temperature dual-loop
system design.
2. Use more powerful wing-blower air supply cycle, to avoid any
dead end, temperature and humidity are evenly distributed in the
test region.
3. Wind-road cycle adopted the design of blowing side wind and
return wind. Wind pressure and wind speed are in accord with test
standards, and make the door instantaneous temperature and humidity
open that is stabilized time soon.
4. Heating, cooling, humidification and dehumidification system is
totally unaided to improve efficiency, reduce testing cost,
increase life expectancy and lower failure rate.
Specification Model | HD-150T | System | Balanced Temperature & Humidity Control System | Temp. range | -70°C~150°C | Humid. range | 20 ~ 98 percent R.H. | Temp. & Humid. accuracy | ± 0.3°C; ± 2 percent R.H | Temp. & Humid. regularity | ± 2°C; ± 5 percent RH | Resolution | 0.1°C, 1 percent, P.I.D control | Heating up | -40°C ~ +100°C within 45 min | Heating down | 20°C~ -20°Cwithin 40min | Interior dimension(W×D×H) | 50×60×50cm | Exterior dimension(W×D×H) | 95x150x105cm | Interior material | Stainless steel plate(SUS304) | Exterior material | Stainless steel plate(SUS304) | Insulation | Rigid foam | Refrigeration system | Air cooled, Hermetic compressor,
single stage refrigeration system. | Display | LCD | Safety devices | No fuse breaker refrigerator over load relay, Refrigeration High
pressure Switch, Over Temp, Protector, Protection relay, Protection
fuse, Water Lever protector, Overheat protector, Alarm | Accessories | Viewing window, Shelves (freely adjustable 2 pcs.), Cable
port(Ø50mm)Chamber lamp. | Weight | Approx. 250 kg | Power | AC220V±10 percent 50/60Hz |
About Haida Haida products are widely used in paper products, packaging, ink
printing, adhesive tapes, bags, footwear, leather products,
environment, toys, baby products, hardware, electronic products,
plastic products, rubber products and other industries, and are
applicable to all scientific research units, quality inspection
institutions and academic fields. Our products meet UL, ASTM, JIS,
GB,SO, TAPPI, EN, DIN, BS and other domestic and international
standards.
|
