PID Temperature Control UV Aging Test Chamber Industrial With
Stainless Steel Plate
Product description:
PID Temperature Control Mode Industrial UV Aging Testing
Chamber is applicable for the sunlight resistant test of
nonmetallic materials and aging test of artificial light sources. A
variety of industrial products can make the reliability test, and
this product can simulate the product in the sun, rain, humidity
and dew conditions, including damage caused by bleaching, color,
brightness down, powder, crack, blur, brittle, intensity decreased
and oxidation
The main technical parameters:
| Item | Specification |
| Inside dimension | 1140W×650D×500Hmm |
| Outside dimension | 1340W×700D×1800Hmm |
| Chamber material | SUS#304 stainless steel |
| Temperature range | RT～70℃ |
| Temperature fluctuation | ±2℃ |
| Temperature control | PID SSR control |
| Humidity range: | Approx. 45%~70% R.H. |
| Controller | Programmable controller, LCD touch screen |
| Control mode | Balance temperature humidity control (BTHC) |
| Test cycle setting | UV exposure, condensation and water spray test cycle is
programmable |
| Lamp power | 40W/Piece |
| Distance from sample to lamp | 50±2mm |
| Centre distance between the lamp | 70mm |
| Irradiance | 0.45~0.8W/m2 (optional) |
| UV lamps | Imported Atlas UV-A: 315~400nm (8pcs, 1600h lifetime) |
| Testing time | 1~999s, m, h adjustable |
| Protection system | Overload short circuit protection
Over temperature protection
Water lacking protection
Earth leakage protection
Auto shut off protection |
uv aging chamber view:
Application industry (not limited to the following):
1. Paint ink paint, resin, plastic
2. Printing and packaging, aluminum, adhesives
3. Motorcycle industry, cosmetics,
4. Metal, electronics, electroplating, medicine and so on.
Applications function:
1. Simulate the sun, rain spray and condensation resulting damage
to test the materials by exposure to sunlight with moisture and
temperature.
2. To get the results of damage after several days or weeks which
is equal to expose to outside for a few months. The damages include
fading, discoloration, brightness down, powder, crack, blur,
brittle, strength decreases and oxidation.
3. Provide reference with testing data for improvement of existing
materials, or to assess the impact of changes in product durability
and other aspects.
Test standard(inculding but not limited to... ):
Compliance with ASTM G154 specifications GB, GJB, MIL, ASTM, CNS,
IEC, JIS, AATCC, DIN, Fed Test, BS and SAE.
Chamber Structure
The PID Temperature Control Mode Industrial UV Aging Testing
Chamber inner bladder of the chamber is made of imported
high-class stainless steel plate while the outer bladder is made of
SUS 304 steel plate.
The heating mode adopts inner bladder trough type heating with its
rapid temperature rise and even temperature distribution.
Test Specimen Mounting:
The standard test specimen holder accommodates 2 panels 75×150mm.
The test panels are actual the side wall of the chamber. To
properly seal the chamber, it is important to have every panel
holder filled with specimens or blank panels and to have panel
holders in place.
UV Accelerated Weathering Tester_pdf.pdf
