Integrate Furniture Testing Machines , Chair Castor Durability Furniture Testing Equipment

Integrate Furniture Testing Machines,Chair Castor Durability Furniture Testing Equipment

PRODUCT DESCRIPTION:

The machine is designed for evaluating the ability of chair base and casters to withstand fatigue stresses and wear caused by moving the chair back and forth.

GENERL SPECIFICATIONS

Packaging Dimensions: (W*D*H) 2600*1130*1550mm

Power supply source: single-phase, 220V±10%, 50/60Hz (can be appointed)

Gross Weight: 659kg

HS Code: 9024800000

DESIGN STANDARD: Bifma x 5.1-2017

STANDARD FEATURES

CONFIGURATION:

TEST PROCEDURES

1.The chair or chair base shall be cycled 2,000 cycles over the obstacles as shown in Figure 16b and then

98,000 cycles on a smooth, hard surface (steel preferred) without obstacles.

2.At the conclusion of cycling, a 22 N (5 lbf.) pull force shall be applied to each caster in line with the caster stem centerline.

PACKAGING AND SHIPPING:
Simulation Animatronic Customer Triceratops are covered with air bubble film before put them into the wooden case, which not only has good shock absorption, impact resistance, heat sealing and also has the advantages of nontoxic, odorless, moisture corrosion, good transparency etc.

AFTER-SERVICE:
If you face any problems in future during testing process we promise we will give you a reply within 48 hours and solution provide within 3 working days. We can offer operation video and English operation muanual. We can provide video-con.