- For Cell Microinjection Operations, Intracytoplasmic Sperm
Injection (ICSI)
- Equipped With Single-axis Motion And Three-axis Locking Functions
- Step Motor, X/Y/Z Moving Range >20mm, Step Moving <20nm,
Moving Speed 0~10mm/s,
- Oil Pressure Microinjector 1000ul, Coarse Rotate 10ul, Fine Rotate
1ul, Air Pressure Microinjector 10ml, Coarse Rotate 600ul, Fine
Rotate 60ul
- Support YZ One Key Lock, , Z One Key Limit, One Key Release
Control, One Key Zero, One Key Move to Memory Position
The A54.0720 micromanipulation operating system has a
Chinese/English bilingual interface. By controlling the rocking
bar, cell microinjection operations can be carried out accurately
and quickly, maximumly improving the success rate. A54.0720 is
equipped with single-axis motion and three-axis locking functions,
providing greater flexibility and convenience for Intracytoplasmic
Sperm Injection (ICSI) ● Equipped with a Chinese/English bilingual interface. ● Good stability, no vibration during operation ● Adjustable microscope needle pitch and horizontal angle by knob ● The attachment functions can be selected and set.(Single-axis
motion or locking, step injection) ● The Z-axis limit position can be set to prevent capillary breakage |
▶ Suspension cell injection Prokaryotic or cytoplasmic injection Assisted Reproductive Technology ICSI operations (intracytoplasmic single sperm injection) | ▶ Suspension cell manipulation Cell transplantation Single-cell separation |
| ▶ A54.0720 Micromanipulation Controller Buttons, display, joystick and side dial are included. The movement
direction and speed of the joystick are transmitted to the
micromanipulation side through the control board. The movement
speed and working range size can be predefined in the software. The
working scope can be selected and changed individually on the
control panel. |
| Micromanipulation controller | A joystick can be moved to control the movementdistance and
direction of the X,Y, and Z axes | | Speed control | Proportional and dynamic force feedback control | | Work mode | Coarse/Fine /X-Fine | | Size (L*W*H) | 200*290*145 mm |
Micromanipulation manipulator: X. Y, Z three-axis motion mechanism, rotating connector and angle
adjustment are included which is used to move and position the
micromanipulation side in three-dimensional space. |
| Single axis moving distance | ≥20mm | | Weights | 3.5 kg | | Movement speed | 0~13000 um/s | | Mechanical adjustment distance | 0~105 mm | | Size(L*W*H) | 140*100*240 mm | | Rotary axis offset angle | -45°~110° |
With good sealing performance, operations such as suspension
positioning and cell removal of embryos can be carried out using
air and oil. Oil pressure microinjector and air pressure microinjector: for manual micro-volume high-precision injection, micro-volume
liquid distribution injection and gas pressure control. 0l pressure microinjector is applied in
complex scenarios with high resolution and high sensitivity (embryo
biopsy and cell implantation, etc. Air pressure microinjector is a
micro-transfer pneumatic micro-syringe, which is widely applied in scenarios like suspending
cells, embryo maintenance, or transferring smaller volumes of
liquid. |
| Oil pressure microinjector | | Function | Aspiration and dispensing of microcells Manual microinjection Cell
removal | | Medium | Paraffin oil | | Volume change per revolution | 1uL/10uL | | Maximum volume | 1000uL | | Injection tube | 1.3 meters long, inner diameter 1.0 mm, outer diameter 2.0 mm |
| Air pressure microinjector | | Function | Microcell suspension maintenance
Aspiration and dispensing of microcell
Small volumes of liquids trace dispensing | | Pressure generation | Air | | Volume change per revolution | 60uL/600uL | | Maximum volume | 10mL | | Injection tube | 1.3 meters long, inner diameter 1.0 mm, outer diameter 2.0 mm |
|
