Specification | A13.0210 Metallurigical Microscope | A | B |
Eyepiece | Wide field WF10X(field number:Φ22mm) |
| Infinity Plan Achromatic Objective | PL L10X/0.25 (Work distance):20.2 mm(Equipped with bright
field objectives) | ● | |
| PL L20X/0.40 (Work distance):8.80 mm(Equipped with bright
field objectives) | ● | |
| PL L50X/0.70 (Work distance):3.68 mm(Equipped with bright
field objectives) | ● | |
| PL L100X/0.85 (Dry)Work distance):0.4 mm(Equipped with bright field
objectives) | ● | |
| PL L5X/0.12 BD (Work distance):9.7 mm(Equipped with bright
& dark field objectives) | | ● |
| PL L10X/0.25 BD (Work distance):9.30 mm(Equipped with bright
& dark field objectives) | | ● |
| PL L20X/0.40 BD (Work distance):7.23mm(Equipped with bright
& dark field objectives) | | ● |
| PL L50X/0.70 BD (Work distance):2.50 mm(Equipped with bright
& dark field objectives) | | ● |
Eyepieces Tube | Inclination angle is 45°and interpupillary distance is 53~75mm. |
Focus System | Coaxial coarse/fine focus system, with tension adjustable and limit
stopper, minimum division of fine focusing: 2μm |
| Nosepiece | Quintuple (Backward ball bearing inner locating) |
Stage | Mechanical stage,overall size:242mmX200mm,moving range: 30mmX30mm |
| Rotundity and rotatable stage size: maximal measurement is Ф130mm
and minimal clear aperture is less then Ф12mm. |
Illumination System | 6V30W halogen and brightness enable control. | ● | |
| 12V50W halogen and brightness enable control. | | ● |
| Integrated field diaphragm , aperture diaphragm and puller type
polarizer. |
| Equipped with frosted glass and yellow ,green and blue filters |
