Product Introduction
The high-precision digital solid density meter is mainly used in
rubber,
plastic, wire and cable, food, composite materials, shoe materials,
glass, precious metal hardware recovery .and other industries.
Solids, granules, thin-film body, the floating body,
a powder body of the sample can be directly read out the average
weight, the average weight in the water, and the specific gravity
value, density, volume, the percentage in the air, convenient and
quick.
The principle
According to ASTM D792, GB / T 1033, JIS-K-6268, ISO 2781 standard.
Archimedes principle of buoyancy, accurate, direct reading
measurement values.
Function
1, as long as 10 seconds (two steps) can be directly read the
specific gravity, the volume value, purity%.
2, the proportion of parts molding, will not cause water leakage.
3, RS-232C computer interface, and can be easily connected to the
PC and printer.
4, using the design of the large tank , to reduce the error caused
by the buoyancy of the hanging bar line.
5, can be directly set the temperature compensation setting
solution compensation setting.
6, the smallest weighing precision 0.005g, the proportion of
calculus precision 0.001g.
7, we can set the standard density value of materials, direct read
Purity%.
8, the use of corrosive liquids, optional anti-corrosion sink.
Main Parameter
Model | DH-300 | DH-600 |
Measuring range | 0.005-300 g, the biggest weighing 300 g | 0.005-600 g, the biggest weighing 600g |
Test types | solid, granules, film, floating body |
Test time | about 5 seconds |
Density | > 1 <1 can be tested |
Density accuracy | 0.001 g/cm3 |
Setting | temperature compensation setting solution compensation setting |
Function | direct display of density, volume |
Standard interfaces | RS-232 |
