chinacoal03
15KW Explosion proof Scraper Winch with MA Certification
A. Scope of application:
The scraper winch is mainly used to metal, chemical, contribution
and the mine etc, and the underground working, such as the
transportation etc. Meanwhile, the scrape winch is just suitable to
the parallel transportation on ground, or the slopes within 500;
Not be the hoisting machines.
B. The main components of the winch: Deceleration device, main
roll, Vice reel, control devices, wire guiding device and motor.
These parts were installed inside and outside the shell, the shell
is a good steel parts, both to protect the supporting role, but
also to bear all the load. It is connected on the basis of two
slide bolt.
Binoculars winch a master reel (mounted on the right, ie, close to
the motor side), a secondary reel (mounted on the left).
A master reel (mounted in the middle) in the three-drum winch, two
vice reel (mounted on the left and right), three drum winch can be
mounted two main reel (mounted on the right and middle), a vice
volume cylinder (mounted on the left), each roll corresponding
control device and a wire rope guide.
Name | Parameter | Unit |
Working pressure | 0.69-1.0 | MPa |
Traction | 8 | kN |
Max rope speed | 32 | m/min |
Air motor | Rated power | 7.5 | kW |
Rotating speed | 1200 | rpm |
Drum | Diameter | 205 | mm |
Length | 150 | mm |
Wheel flange diameter | 350 | mm |
Wire-rope diameter | 9.3 | mm |
Rope
capacity | 45 | m |
External dimension | L × W × H | 920× 675× 475 | mm |
Working condition | Temperature | -10 +60 | ° C |
Humidity | 100% | |
Wind speed & wave height | 6 / 2 | level/M |
Weight | 360 | kg |
