Product Introduction(chinacoal03)
Flow manufacturing using wear-resistant alloy material of PN type
slurry pump, long life. 6 "and 6" mud sand impeller and shaft by
screw thread, 8 "and 8" above the mud pump, the pump body is
larger, the open structure level, disassemble and convenient
maintenance.
Seal packing seal used in general, work should be injected into the
higher than the working pressure of 1 kg / cm ² of shaft seal
water.Model PN mud pump, the transmission direction, rotates in
counterclockwise direction (1, 2, 3PN clockwise) vane wheel screw
connected with the shaft, if the opposite direction, vane wheel
will fall off from the shaft.
Main Parameter
|
Pump type | Flow m 3 /h | Lift m | Speed r/min | Allow NPSH m | Pump efficiency % | Power kw | Pump weight kg | Diameter mm |
Shaft power | With power | Inhalation | Discharge |
1PN | 7.2 12 16 | 14 13 12 | 1430 | 0.53 | 21 30 35 | 1.3 1.41 1.5 | 3 | 120 | 50 | 25 |
2PN | 30 47 58 | 22 19 17 | 1450 | 1.32 | 33 39 39 | 5.45 6.25 6.9 | 11 | 150 | 96 | 50 |
2PNL | 30 47 58 | 22 19 17 | 1450 | 1.32 | 33 39 39 | 5.45 6.25 6.9 | 11 | 250 | 62 | 53 |
3PNL | 54 108 151 | 26 21 15 | 1470 | 2.35 | 32 42 37 | 12 14.7 16.7 | 22 | 450 | 125 | 75 |
3PN | 54 108 151 | 26 21 15 | 1470 | 2.35 | 32 42 37 | 12 14.7 16.7 | 22 | 280 | 90 | 85 |
4PN | 100 150 200 | 41 39 37 | 1470 | 2.95 | 46 55 61 | 24.3 29 33.1 | 55 | 1000 | 150 | 100 |
4PN(1) | 41.5 80 111 | 51 50 49 | 1470 | 1.92 | 23 36 44.5 | 25 30.2 33.1 | 55 | 1000 | 150 | 100 |
4PN(2) | 52 100 138 | 51 50 49 | 1470 | 2.2 | 26 37 47 | 28 37 39 | 75 | 1000 | 150 | 100 |
6PN | 230 280 320 | 27 26 25 | 980 | 2.59 | 56 60 62 | 30.2 33 35.2 | 75 | 2.59 |
|
|